Replacement Handles For UPVC Windows

UPVC window seal replacement handles are available in different styles, but they all share the same locking mechanism. To replace a uPVC handle, first remove the top screw from the base of the window handle which will reveal two more screws.

Then, measure the spindle to make sure your new handle will fit. It's important to know the type of handle you have because there are a variety of sizes.

Inline Espagnolette Handles

Most double-glazed windows have Espagnolette handles which operate multi-point locks to provide greater security. They operate by virtue of a 7mm square spindle from the back of the handle which connects with a gearbox on the inside of the window frame, which turns multi-locks when turned. They are available in a variety of designs, including cockspur, inline, and key locking handles.

The uPVC handle replacement kits we provide are designed to make replacing a damaged or broken window handle espagnolette simple. These uPVC handles include all the fixing screws and a variety of spindle sizes to suit the majority of applications. These handles also come with key-plugs that permit them to be switched from standard open/closed handles to egress or fire escape non locking handles (if when used with the correct key plug).

If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Another alternative is our Yale Sparta 2 Inline Espag Handle which has been designed for minimal aesthetic intrusion with a reduced base height. It is part of the suited hardware range and comes with a variety of finishes that meet the specifications of BS EN1670:2007 Grade 5. They have been tested for durability and are suitable for use in acidic woods and coastal environments. They can be used with key-locking inserts that cylinder-immobilise when required.

Cockspur Handles

Often found often on older uPVC and aluminium windows the cockspur handles are a basic catch and latch arrangement. The handle's nose is affixed to or put into the catch, which is a wedge block of plastic that is positioned on the frame of the window. The wedges come in various sizes, and it is crucial to determine the step height you require prior to purchasing the replacement handle. Typically, uPVC frames have a handle step of 9mm and aluminium frames tend to use a step height of 21mm.

The handle of the cockspur is lockable with a key, providing security to your home. The lock is fitted inside the handle using a spindle that fits into the hole of the handle (also known as a backset). The spindle is 7mm square and can be used either to open or close the window.

It is essential to ensure that the new cockspur handle has the same height of the original. This is usually measured from the base spur of the handle to the underside of handle nose. This measurement is sometimes called the stack height or backset. It is essential to know this information prior to placing an order for any handle.

Cockspur handles can be straight or universal or cranked. They are available in left or right handed versions. This allows the handles to be installed on right or left opening windows and provides the operator with an easier access.

Check if your window needs a restrictor. This is designed to stop the handle from opening beyond a certain level. Generally speaking, they are required for high rise flats or commercial properties for security reasons. The majority of domestic homes don't need these.

There are many different styles and colors for a the cockspur handle, such as brushed stainless steel and white uPVC choices. The best choice for your windows will be based on your personal preferences and style, as well as how you want your window to perform.

Tilt and Turn Handles

The UK is home to many double-glazed windows with tilt and turn handles. Both timber and upvc ones come with these handles. The handle can be rotated at any angle, even 180 degrees. This allows the window be opened to the room fully, and also to lower it for ventilation. The handle is locked in this position and requires a key to unlock it when needed.

This type of handle is easy to replace, with only one large handle instead of multiple smaller ones. This can reduce the overall appearance of the handle and is more in line with the modern minimalistic design trends. They are also much cleaner since they open to the inside.

They are also 4 to 8 times stronger than a casement window. This makes them ideal for larger windows and doors. The frames are also constructed of steel core, which provides additional durability and strength.

The tilt-and-turn mechanism is also more secure than a casement, because the handle is locked in any position. This is especially crucial in areas where children may live, since it will stop them from accidentally opening the window.

Many homes choose tilt and turn windows because they can be used in different ways. They can be opened horizontally, just like windows, Replacement Handles For UPVC Windows lowered down in a hopper-style to allow for ventilation, or tilted inwards for cleaning and maintenance. This is a great choice for those looking to improve airflow in their home and can also assist with noise reduction. The glass is easily removed making them easy to clean and maintain. They are available in a wide range of sizes and colours. They are perfect for any home and will complement both modern and traditional styles.

Crank Handles

Crank handles require little effort to open, and allow for a spectacular view of the outside without obstructing the glass. These handles are commonly used on casement windows hinged on the sides or awning windows. They feature the same mechanism as a window bar and linkage arm that supports the window sash, which can be opened or closed by turning the handle in the clockwise direction. In contrast to other types of handles the mechanism of a crank window and replacement handles for upvc windows handle are often subjected to wear and tear that can cause the gears strip and the handle to cease functioning or fall off the shaft of the operator. By inspecting the crank handle and the mechanism of the operator regularly will ensure that they remain in good condition for many years to be.

A crank handle consists of a mechanical arm that's attached to a perpendicularly rotating shaft. The handle is operated manually by gripping it and turning it in a circular manner similar to how you operate a pencil sharpener. In some cases the handle could be operated by the leg.

The base of the crank handle is hollow. This hole allows it to connect to equipment and machinery. The handle's arm features a connecting bar that converts the circular motion from the handle into rotary and reciprocating motions to operate machines and equipment.

Boats are typically transported on trailers using crank handles, as well as the adjusting equipment and machinery. They are typically made of stainless steel that is resistant against corrosion in marine environments. This is why the majority of boat crank handles are coated with powder to protect them from damage and also to make them easier to clean.

Replace your crank handle in the event that it stops working or will not open the window. Find the trim mounting screws inside the track of the window frame. If there aren't any, you can try to loosen the casement cover using a strong putty knife by sliding it between the window jamb and frame and pulling it. If that doesn't work, you can take the cover off and get access to the crank mechanism by removing the screws inside the window frame.